Parts & Accessories
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
$12.00 - $12.99
Customize the look and feel of your Crank Brothers 5050 pedals or replace worn pins with their Pin Kit. Pins are available in Short (3mm), Long (5mm) and Set Screw (8mm) versions, all of which offer different amounts of grip. Thirty-six pins are included in each kit.
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
A set of durable, SPD-compatible replacement cleats that come with all mounting hardware. Get that fresh cleat feel These solidly-built cleats work with any SPD-compatible pedals whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Compatible with all 2-bolt SPD-style pedals - Directly compatible with Bontrager Comp MTB and Commuter pedals - Includes mounting hardware - Float: 4-deg
Get that fresh cleat feel These solidly-built cleats work with Bontrager road pedals or any Look Cycle’s KÉO-compatible clipless pedals. Whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Replacement cleats for all Look Cycle’s KÉO®-compatible road pedals - Directly compatible with Bontrager Comp Road pedals - Set includes 1 pair
$15.99 - $19.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
• Extends pedals • Not for use on exercise bikes
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: - enduro catridge bearings - igus LL-glide bearings - double seal system (internal and external seals) - hex alloy end caps - o-rings - nuts - sleeve bushings - bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
It's amazing what a fresh set of cleats will do for your ride, not to mention the health of your knees. Garmin's Vector Cleats offer six or zero degrees of float. • Compatible with all Garmin Vector Pedals
Look's replacement cleats for their Delta Pedals are made of polyamide nylon with Teflon toe and heel inserts for easy entry/exit, efficient pedaling, and long-lasting durability. Molded wear indicators show when it's appropriate to replace your cleats, and they are available with 9-degrees of float (red), and 0-degrees of float (black).
Look's replacement cleats for their classic Keo pedals are made of polyamide nylon with Teflon toe and heel inserts for easy entry/exit, efficient pedaling, and long-lasting durability. Molded wear indicators tell you when it's appropriate to replace your cleats. These cleats are available with three different amounts of float: 4.5-degrees (gray), 9-degrees (red), and fixed float (black).
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
Crank Brothers' Quattro 3-Hole Cleats are the perfect cleats to use with your 3-hole compatible road shoes and Crank Brothers pedals. They're made from solid brass for crisp entry and exit, and durability.
Look's Keo Grip Cleats feature special anti-slip surfaces on the bottom that improve traction while walking. They are also made of polyamide nylon for easy entry/exit, efficient pedaling and durability. And, there are wear indicators that tell you when it's time for new cleats. These cleats are available with three different amounts of lateral float: 4.5-degree (gray), 9-degrees (red), and fixed float (black).
$54.99 - $64.00
Speedplay’s Walkable Cleat technology for Zero pedals sets a new standard for user-friendly, off-the-bike functionality. Speedplay’s Zero Aero Walkable Cleats are the first truly walkable cleats for road pedals. The integrated, rubberized covers stay on the cleats while you are riding. When walking, the covers improve traction and protect the cleats from wear. Additionally, the thin, contoured cleat profile allows for a more natural gait and makes walking in road shoes much less awkward. - Grippy, rubberized tread covers the cleat for improved traction - Durable cover material is resistant to wear and will not scuff floors - Thin, contoured cleat profile makes walking easier and more fluid - Zero Aero Walkable Cleats are streamlined to reduce drag and are compatible with all models of Zero Pedal Systems - Fits all standard 3-Hole and 4-Hole shoes - Replacement Zero Aero Walkable Cleat Covers and Cleat Buddies are available separately
Sometimes after a a few seasons of punishing riding through mud, sand, and dust, your pedals need a little love to get them spinning smoothly again. iSSi's Spindle Rebuild Kit includes everything you need to get your iSSi Triple pedals spinning just like new. Includes: • chromoly spindles • three sealed bearings • spindle nuts • seals • iSSi branded end caps
Page 1 of 1